Wall-mounted Welding Fume Filtration System with Fume Collection Arm
Specification:
Airflow: 1200-2400m3/h
Power:0.75-2.2kw
Voltage: 3p
Efficiency: 99.9%
Body size: 600*500*600mm
Noise: 75dB
| Model | AirflowM³/h | VoltageV/HZ | PowerKW | Filter efficiency | Dimension(MM) | NoisedbA |
| BG1200 | 1200 | 380V/50 | 0.75 | 99.9% | 600*500*600 | <72 |
| BG1500 | 1500 | 380V/50 | 1.5 | 99.9% | 600*500*600 | <72 |
| BG2400 | 2400 | 380V/50 | 2.2 | 99.9% | 600*500*600 | <75 |
Large particles are departed in the pre-filter stage, small particles and gas are separated.
Equiped with a high volume airflow and vaccum fan to make sure a large volume
Standard flexible suction arm, 360 degree all directions to target positon and suck the fume at the source
With small size and easy to install, Little maitenance in bad situation
Applications:
Welding fume, polishing dust removal or other process
The fixed positions, training schools, welding working positions, wall-mounted positions.
Welding dust collector, welding fume extraction,welding smoke extractor, welding fume exhaustor, welding fume purifier, smoke eater from source
Applications :Qingdao Loobo welding fume extractor are mainly used to extract/collect the fume and dust in the metal fabrication process, like the welding, polishing, grinding, metal cutting, etc.
With active carbon filter layer, some odor gas can be absorbed before released the clean air. Portable type with small size, you can move them freely in your workshop to the working posation, economic and high efficiency.
Available for both one arm and double arms for one or two working stations.
LB-JZ Series Welding Fume Extractor Parameters Table:
| Model | Airflow (M3/h) | Voltage (V) | Power (kw) | Size L xWxH (m m) | Noise (dB) |
| LB-JZ1200 | 1200 | 380 | 1.1 | 650x550x1250 | ≤70 |
| LB-JZ1500 | 1500 | 380 | 1.5 | 650x550x1250 | ≤70 |
| LB-JZ2400 | 2400 | 380 | 2.2 | 650x550x1250 | ≤72 |
| LB-JZ3600 | 3600 | 380 | 3.0 | 650x550x1250 | ≤72 |
| LB-2400S | 2400 | 380 | 2.2 | 650x550x1250 | ≤72 |
| LB-3600S | 3600 | 380 | 3.0 | 650x550x1250 | ≤72 |
| LB-JZ1500(D) | 1500 | 380 | 1.5 | 650x670x1250 | ≤70 |
| LB-JZ2400(D) | 2400 | 380 | 2.2 | 650x670x1250 | ≤72 |
| LB-JZ3600(D) | 3600 | 380 | 3.0 | 650x670x1250 | ≤72 |
| LB-2400S(D) | 2400 | 380 | 2.2 | 650x670x1250 | ≤72 |
| LB-3600S(D) | 3600 | 380 | 3.0 | 650x670x1250 | ≤72 |
LB-JZ (D) back-flushing pressure is 0.5-0.6Mpa.
The " D " in models for the welding fume extractors represent Pulsing back-flushing automatic dust-removal system. " S " respresents the welding fume extractor has the double arms for two working stations.
The below picture shows that the welding fume extractor are used in the welding workshop to extract the fume and keep the workshop clean
Videoes:
The work video about the welding fume extractors for the welding condition, which have a good performance : http://loobo.cn/video/gyhb/600.htm
The company development film :
http://loobo.cn/video/693.htm
https://youtu.be/yLBAvptRM-M
http://loobo.cn/video/gyhb/606.htm
Facility Characteristics about the welding fume extractors
1) It is equipped with ABB turbo fan and motor imported from Germany and America, with overload prevention circle to avoid motor damage. It is of steady performance.
2) It is equipped with built-in centralized PLC controlling system. The operation panel is clear and simple, very easy to operate.
3) Pulsing back-flushing automatic dust-removal system: The filter core is the automatic rotating and back-flushing type, which keeps the filter core surface clean when working, to insure the stable blowing rate; The air compressor parts are connected with high pressure rubber pipe with high pressure air-inflow in the bottom, which insure the facility always in good working condition.
4) The filter core is imported from the large company in America with long useful life. It can arrest the 0.3μm particles. The filtering effect is good for all kinds of particles including the wet particles.
5) It is equipped with the all-directions sucking arm of 360 degree rotating. It can suck the fume exactly from the source which make best of the fume collection efficiency, and insure the workers’ health in the largest extent.
6) It is equipped with three layer filter system to avoid the damage effect of flame and large slag particles, which extend the useful life, more safe and more reliable.
7) The clean air is exhausted uniformly and diffusely through the gridiron outlet, so it can minimize the noise.
8) It is attached with all-direction caster wheels, which makes the facility movable freely and easy to position.
9) Photoelectric controlled on/off, energy saving and high efficiency. The hood has the lighting device which is upon customer’s choice.
10) The parts working condition are all stable and has long useful life, meantime easy to be replaced.
Custom design and production for the welding fume extractor is available according your requirement
Other main welding fume extractors:
1. LB-JZX model(double cartridge filters fume extractor for metal welding, welding workshop cleaner machine ):
| Model | Airflow(m3/h) | Power(kw) | Voltage(v/hz) | Size(mm) | Noise(dB(A)) |
| LB-JZX2400 | 2400 | 2.2 | 380/50HZ | 900*800*1480 | 75 |
| LB-JZX3600 | 3600 | 3.0 | 380/50HZ | 900*800*1480 | 78 |
| LB-JZX4800 | 4800 | 4.0 | 380/50HZ | 900*800*1480 | 78 |
| LB-JZX2400S | 2400 | 2.2 | 380/50HZ | 900*800*1480 | 75 |
| LB-JZX3600S | 3600 | 3.0 | 380/50HZ | 900*800*1480 | 78 |
| LB-JZX4800S | 4800 | 4.0 | 380/50HZ | 900*800*1480 | 78 |
The JZX models welding fume extractor is one updated model from LB-JZ models, which have a high performanec than the LB-JZ series welding fume extractors
2.LB-BG model(wall mounted welding smoke eater type):
| Model | AirflowM³/h | VoltageV/HZ | PowerKW | Filter efficiency | Dimension(MM) | NoisedbA |
| BG1200 | 1200 | 380V/50 | 0.75 | 99.9% | 600*500*600 | <72 |
| BG1500 | 1500 | 380V/50 | 1.5 | 99.9% | 600*500*600 | <72 |
| BG2400 | 2400 | 380V/50 | 2.2 | 99.9% | 600*500*600 | <75 |
3.LB-JK model(with simple structure welding dust collector, air cleaner for metal fabriaction ) :
| Model | Airflow(m3/h) | Power(kw) | Voltage(v/hz) | Size(mm) | Noise(dB(A)) |
| LB-JK1200 | 1200 | 0.75KW | 220/50HZ | 530*640*1000 | 65 |
4.LB-JW model(Flat filter welding smoke exhauster for metal cutting):
| Model | Airflow M³/h | Power KW | Voltage V/Hz | Dimension (mm) | Noise (dbA) |
| JW1200 | 1200 | 1.1 | 380/50 | 700*700*1110 | <72 |
| JW1500 | 1500 | 1.5 | 380/50 | 700*700*1110 | <72 |
| JW2400 | 2400 | 2.2 | 380/50 | 700*700*1110 | <75 |
5.LB-JF model(High vacuum pressure type welding fume master,especially for robot welding):
| Model | Airflow M³/h | Power KW | Voltage V/Hz | Kpa | Ash removal model | compressed air (mpa) | Dimension (mm) | Noise (dbA) |
| JF190 | 190 | 1.5 | 380/50 | 23000 | automatic blow | 0.5-0.6 | 550*550*1100 | <72 |
| JFS245 | 245 | 3.0 | 380/50 | 32000 | 0.5-0.6 | 550*550*1100 | <75 |
Company Info.
We,Qingdao Loobo Environmental Protection Technology Co.,Ltd is aimed to air purifying and kinds of removing fume exhausted, with its own R&D team more than ten years manufacturer, located in Qingdao city of china, specialized in the main products:
1,portable welding fume extractors,and soldering fume extractors etc.,
2.downdraft benches(grinding dust removal worktable),
3.central fume purification projects,
4.Spare parts:flexible suction arm,etc.
All of our products with the ISO9001, and CE certification for parts of products, the quality can be guaranteed.
ATTN: Miss Molly Huang
Tel: 86-15064847869
Skype: mollyhice
Email: hqhpl@126.com
|
|
Wall mounted welding fume extractor with one and dual arms Images
|
