Portable welder fume master with single or double arms for welding workshop

Portable welder fume master with single or double arms for welding workshop

Arc and other types welding is a safe occupation when sufficient measures are taken to protect the welder from potential hazards. The operation of welding fume control equipment is affected by various factors including proper use and positioning of the equipment, maintenance of the equipment, LOOBO welding fume extractors are the suitable for your use.

LOOBO supplies complete line of portable, stationary, and engineered solutions for welding fume control. Our team of safety specialists can assist with your questions and concerns, and provide you with a full complement of weld fume extraction solutions.

Available for both one arm and double arms.

Automatic or Manual operating back-flushing dust-removal system.

LB-JZ Series Welding Fume Purifier Parameters Table

Custom design and production is available.

The welding fume purifier is easy of installation, and has no technical requirements when the customer install and use it. The flexible extraction arm is made from high quality material of PVC and steel wire, which is anti-corrosion, heat-resistant of up to 140°C. It can swivel 360º and can be brought in any desired direction without additional support. It is equipped with the damper to adjust the wind. It is equipped with the caster wheels and can be freely mobile to meet the requirements of different work places.

The purified gas can meet the standard requirements and can enter into work room or indoor place, which is helpful to keep the room close, maintain the temperature and be convenient for work.

Facility Characteristics

1) It is equipped with special turbo fan and motor, both the air pressure and air volume can reach the standard, and to ensure that the welding fume purification a good performance.

2) Advanced design of air suction hood and dust collector function in one body, to prevent the diffusion of welding smoke pollution from the source.

3) The circuit of the machine is adopted overload protection circuit, which prevent equipment and circuit burn, so the machine has a high security and stable performance.

4) The hose of the flexible extraction arm is high quality PVC steel wire hose, it can resist the 140°C, with corrosion resistance and light weight .

5) The built in support structure is a set of self balance type linkage mechanism with characteristics of a full range of hovering, pull the handle on the hood, easily stretch the arm to reach any position within the arm length (we can custom made the arms length according to user needs, the max is 5m long), and hover in the ideal position of soot absorption without any auxiliary supporting facilities.

6)The flexible extraction arm can be applied for the complicated condition that have no way to install the ducting.

7) Filter is an important part of the fume extractor machine, it is the heart of the dust removal equipment, its performance and quality is the key to the service life of the equipment and the performance of fume extraction. We use the imported PTFE polyester fiber material for the main cartridge filter. The material has very low friction coefficient, good wear resistance and excellent chemical stability, high accuracy, according to the condition of fine up to 0.2 microns. The material surface is smooth, not easy to adhere, it is more easy for the pulse jet cleaning system. The cartridge filter service life is long, around 1-2 years under normal operating conditions.

8) Cleaning way: manual cleaning, and automatic cleaning system.

For the auto cleaning type, we use the pulse jet cleaning way, that is, one by one cartridge automatic cleaning orderly, pulse valve open a time, then generates a pulse action, the injection pulse intensity and frequency can be adjusted, and the cleaning and filtration can be run at the same time, so to make sure the machine works well and promote the production efficiency.

9) the inside of the fume extractor machine is adopted with three layer protective measures for fire hazard and large molten slag particles, to make the purifier for a longer service life, and more safe and reliable.

10) The Fume Extractor is equipped with industrial casters: the active casters and stationary casters, to make sure a free movement and positioning. The caster is of surface super polyurethane materials, to make the equipment has a high impact resistance and strength.

11) The reasonable collocation of the grid air outlet and the high quality sound insulation material can reduce the noise of the welding fume purifier effectively.

12) The consumptive material of the fume extractor has a stable performance, and convenient and quick to change.

Other main similar products:

1. LB-JZX model(double cartridge filters):

2.LB-BG model(wall mounted type):

3.LB-JK model(with simple structure):

Model	Airflow(m3/h)	Power(kw)	Voltage(v/hz)	Size(mm)	Noise(dB(A))
LB-JK1200	1200	0.75KW	220/50HZ	530*640*1000
Portable welder fume master with single or double arms for welding workshop Images