1.LB-JF High Pressure and vacumm type welding dust extractor
LB-JF high vacuum model dust collector , mainly applied to purification dry, no oil, no corrosion of the smoke gas during welding, cutting and grinding process.
LB-JF high vacuum model dust collector is industrial processing, welding dust removal, cutting dust, grinding dust removal of the preferred products.
**Products Advantage:
1),LB-JF high vacuum model dust collector adopted international advanced polyester fine filtering technique, can be effective absorption and filtration the smoke micro (0.2 um) of the welding, cutting and grinding process, filtration efficiency can reach 99.9%. At the same time and high gas flow is guaranteed.
2), the purifier has low noise, stable performance, convenient operation and use and many other advantages.
3), this product is double filter, the first level for Mars filter and larger particles, secondary to tiny dust filter.
***Operating Principle:
Under the device's high negative pressure, the fume and dust through suction pipe into the purifier, with the Martian dust before enter the purifying cavity were blocked and separated by fire sand. The remaining dust flow is blocked and uniform distribution by flow plate inside the purifying cavity, in order to better purify by cartridge filter.
Larger particles of dust under the action of gravity sinking into the collection of ash hopper, while small particles of dust under the action of suction generated by the eddy current is suspended in internal to purify by cartridge filter.
Small particles of dust on the surface of the filter cartridge, after the effect of gathered adsorption and combined, sinking into the ash hopper. After purification, the air flow out, offer a healthy working environment for workers.
****Technical Parameter:
|
Model
|
Airflow
M³/h
|
Power
KW
|
Voltage
V/Hz
|
Kpa
|
Ash removal model
|
compressed air
(mpa)
|
Dimension
(mm)
|
Noise
(dbA)
|
|
JF190
|
190
|
1.5
|
380/50
|
23000
|
automatic blow
|
0.5-0.6
|
550*550*1100
|
<72
|
|
JFS245
|
245
|
3.0
|
380/50
|
32000
|
0.5-0.6
|
550*550*1100
|
<75
|
2.LB-GD Centralized High Vacuum Smoke Purifier for Welding/Grinding
Application Place:
High vacuum model dust collector mainly applied to purification dry, no oil, no corrosion of the smoke gas during welding, cutting and grinding,polishing process, can connect with the Robot arm for the operation condition of the robot welding, and can connect to the ducting for multiple working position in the workshop.
Technical Parameter:
|
Model |
Airflow
M3/H |
Power
KW |
air intake
Mm |
Voltage
V/HZ |
Pressure pa |
Size
mm |
|
LB-GD-300 |
260~350 |
2.2 |
Φ75 |
380/50 |
23000 |
1200*720*1250 |
|
LB-GD-520 |
460~550 |
7.5 |
Φ100 |
40000 |
1760*720*1520 |
|
LB-GD-1000 |
1000-1200 |
18.5 |
Φ150 |
30000 |
1950*870*1800 |
|
LB-GD-2000 |
1800~2000 |
25 |
Φ200 |
31000 |
2000*900*1800 |
|
LB-GD-2500 |
2100~2500 |
29 |
Φ250 |
27000 |
2100*950*1800 |
Product Advantage:
This kind of filter with low noise high negative pressure fan, not only with low noise,but also produce quite high negative pressure. Can connect to multiple station convulsions dust removal at the same time.
The equipment adopts the integrated design, compact structure; cover a small area l, and electric control system use PLC for automatic control, easy to operation. The high pressure dust removal system adopts imported and heat-resistant, wear-resistant high pressure composite suction hose, its inner surface smooth wind resistance losses small.
According to the different work station requirements, its methods of catching dust can be used in a high pressure suction mask, universal environmental protection welding torch, grinding wheel.
We can provide a variety of models according to different working conditions and dust controlling.
|
|
LB-JF High Pressure and vacumm type welding dust extractor Images
|
