Portable Fume Extractor for weldng/laser cutting/grinding
Qingdao Loobo welding fume extractor are mainly used to extract/collect the fume and dust in the metal fabrication process, like the welding, polishing, grinding, metal cutting, etc.
With active carbon filter layer, some odor gas can be absorbed before released the clean air. Portable type with small size, you can move them freely in your workshop to the working posation, economic and high efficiency.
Mobile welding smoke extractor for welding workshop air cleaner
Use for purification of the smoke and dust during the welding, polishing, cutting, grinding process and the recycling of rare metals and precious material, can purify large amounts of suspended small metallic particles in the air.
* Operating Principle:
It is equipped with three layer filter system
1, under the help of the fan device, the welding fume is sucked into inlet through sucking hood. There is the flame arrester in the inlet, so the spark can be blocked here, the left fume and dust is sucked into gravity separator, and then the bigger particles firstly descend into dust bag.
2, the smaller particles are arrested in the surface of core filter. The cleaner gas then flow into clean room after being purified by core filters.
3, in clean room, the clean gas is then further purified by active carbon. At last, the gas meets the required standards and enters into air or other required room.
**Facility Characteristics
1) It is equipped with ABB turbo fan and motor imported from Germany and America, with overload prevention circle to avoid motor damage. It is of steady performance.
2) It is equipped with built-in centralized PLC controlling system. The operation panel is clear and simple, very easy to operate.
3) Pulsing back-flushing automatic dust-removal system: The filter core is the automatic rotating and back-flushing type, which keeps the filter core surface clean when working, to insure the stable blowing rate; the air compressor parts are connected with high pressure rubber pipe with high pressure air-inflow in the bottom, which insure the facility always in good working condition.
4) The filter core is imported from America with long useful life. It can arrest the 0.3μm particles. The filtering effect is good for all kinds of particles including the wet particles.
5) It is equipped with the all-directions sucking arm of 360 degree rotating. It can suck the fume exactly from the source which make best of the fume collection efficiency, and insure the workers’ health in the largest extent.
6) It is equipped with three layer filter system to avoid the damage effect of flame and large slag particles, which extend the useful life, safer and more reliable.
7) Clean air uniform guidance and dispersed from the grille outlet, to keep the noise minimum.
8) It is attached with all-direction caster wheels, which makes the facility movable freely and easy to position.
9) Photoelectric controlled on/off, energy saving and high efficiency. The hood has the lighting device which is upon customer’s choice.
10) The parts working condition are all stable and have long useful life, meantime easy to be replaced.
Custom design and production is available.
LB-JZ Series Welding Fume Purifier Parameters Table, Maunal cleaning type:
| Model | Airflow
(M3/h) | Voltage
(V) | Power
(kw) | Size
L xWxH (mm) | Noise
(dB) |
| LB-JZ 1500 | 1500 | 380 | 1.5 | 650x550x1250 | ≤60 |
| LB-JZ 2400 | 2400 | 380 | 2.2 | 650x550x1250 | ≤68 |
| LB-JZ 3600 | 3600 | 380 | 3.0 | 650x550x1250 | ≤68 |
| LB-JZ2400S | 2400 | 380 | 2.2 | 650x550x1250 | ≤69 |
| LB-JZ3600S | 3600 | 380 | 3.0 | 650x550x1250 | ≤72 |
LB-JZ Series Welding Fume Purifier Parameters Table, Auto cleaning type:
| Model | Airflow
(M3/h) | Voltage
(V) | Power
(kw) | Size
L xWxH (mm) | Noise
(dB) |
| LB-JZ 1500(D) | 1500 | 380 | 1.5 | 650x670x1250 | ≤72 |
| LB-JZ 2400(D) | 2400 | 380 | 2.2 | 650x670x1250 | ≤72 |
| LB-JZ 3600(D) | 3600 | 380 | 3.0 | 650x670x1250 | ≤75 |
| LB-JZ2400S(D) | 2400 | 380 | 2.2 | 650x670x1250 | ≤75 |
| LB-JZ3600S(D) | 3600 | 380 | 3.0 | 650x670x1250 | ≤75 |
LB-JZ (D) back-flushing pressure is 0.5-0.6Mpa.
Other Similar products:
LB-JC Smart welding smoke purifier
| Model | Airflow
M³/h | Power
KW | Voltage
V/Hz | Ash removal model | compressed air
(mpa) | Dimension
(mm) | Noise
(dbA) |
| JC1500 | 1500 | 1.5 | 380/50 | automatic blow | 0.5-0.6 | 700*760*1460 | <72 |
| JC2400 | 2400 | 2.2 | 380/50 | 0.5-0.6 | 700*760*1460 | <75 |
LB-JZX Series Welding Fume Purifier Parameters Table, Double cartridge filter,Auto cleaning type:
| Model | Airflow
(m3/h) | Power
(kw) | Voltage
(v/hz) | Size(mm) | Noise(dB(A)) |
| LB-JZX2400 | 2400 | 2.2 | 380/50HZ | 900*800*1480 | 75 |
| LB-JZX3600 | 3600 | 3.0 | 380/50HZ | 900*800*1480 | 78 |
| LB-JZX4800 | 4800 | 4.0 | 380/50HZ | 900*800*1480 | 78 |
| LB-JZX2400S | 2400 | 2.2 | 380/50HZ | 900*800*1480 | 75 |
| LB-JZX3600S | 3600 | 3.0 | 380/50HZ | 900*800*1480 | 78 |
| LB-JZX4800S | 4800 | 4.0 | 380/50HZ | 900*800*1480 | 78 |
JW Carbon air filter for welding
JK Cartridge type fume extractor
LB-JX Electrostatic welding fume extractor
LB-QX Solder and Laser Fume Extractor
Package:Plywood Box
Price Term: Ex-works,FOB,C&F by sea
Lead time:1 week for standard products and 2-3 weeks for special customized.
Company Information
We,Qingdao Loobo Environmental Protection Technology Co.,Ltd is aimed to air purifying and kinds of removing fume exhausted, with its own R&D team more than ten years manufacturer, located in Qingdao city of china, specialized in the main products:
1,portable fume extractor/smoke eater,
2.downdraft benches(grinding dust removal worktable),
3.central fume purification projects,
4.Spare parts:flexible suction arm,etc.
All of our products with the ISO9001, and CE certification for parts of products, the quality can be guaranteed.
ATTN: Miss Molly Huang
Qingdao Loobo Environmental Protection Technology Co.,Ltd
Factory Address: No.19, Hechuan Road, Licang Industry Park, Qingdao, China
Phone: +86-15064847869
Skype:mollyhice
Email: hqhpl@126.com
Web: www.hqhlooboex.com
Product Tags:
|
|
Portable Fume Extractor for weldng/laser cutting/grinding, moble welding dust collection Images
|
