Portable and Movable Welding Fume Extractor/Mobile
Laser Cutting Dust Collector
LB-JZ Series Welding Fume Purifier Parameters Table:
| Model | Airflow (M3/h) | Filter Area (M2) | Voltage (V) | Power (kw) | Size L xWxH (mm) | Noise (dB) | N. W. (KG) |
| LB-JZ 1500 | 1500 | 12 | 380 | 1.5 | 650x550x1250 | ≤60 | 75 |
| LB-JZ 2400 | 2400 | 15 | 380 | 2.2 | 650x550x1250 | ≤68 | 80 |
| LB-JZ 3600 | 3600 | 20 | 380 | 3.0 | 650x550x1250 | ≤72 | 105 |
| LB-2400S | 2400 | 20 | 380 | 2.2 | 650x550x1250 | ≤69 | 98 |
| LB-3600S | 3600 | 30 | 380 | 3.0 | 650x550x1250 | ≤72 | 120 |
LB-JZ (D) back-flushing pressure is 0.5-0.6Mpa.
Pulsing back-flushing automatic dust-removal system.
The BasicStage Filtration Process
Stage 1: Air passes trhough the pre-filter fire-proof net.
Stage 2: Air passes through a second pre-separator to further reduce medium to heavy particulate matter.
Stage 3: Air passes through the LongLife-H filter where welding fume particles are captured and deposited.
Stage 4: Activated carbon filter will help prevent or neutralize the release of odors back into the environment.
Operating Principle:
Under the help of the fan device, the welding fume is sucked into inlet through multi-direction sucking hood. There is the flame arrester in the inlet, so the spark can be blocked here, and the left fume and dust is sucked into gravity separator. The bigger paticiles firstly descend into dust bag. The smaller particles is arrested in the surface of core filter. The cleaner gas then flow into clean room after being purified by core filter. In clean room, the clean gas is then further purified by active carbon. At last, the gas meets the required standards and enter into air or other required room.
Facility Characteristics
1) It is equipped with ABB turbo fan and motor imported from Germany and America, with overload prevention circle to avoid motor damage. It is of steady performance.
2) It is equipped with built-in centralized PLC controlling system. The operation panel is clear and simple, very easy to operate.
3) Pulsing back-flushing automatic dust-removal system: The filter core is the automatic rotating and back-flushing type, which keeps the filter core surface clean when working, to insure the stable blowing rate; The air compressor parts are connected with high pressure rubber pipe with high pressure air-inflow in the bottom, which insure the facility always in good working condition.
4) The filter core is imported from the large company in America with long useful life. It can arrest the 0.3μm particles. The filtering effect is good for all kinds of particles including the wet particles.
5) It is equipped with the all-directions sucking arm of 360 degree rotating. It can suck the fume exactly from the source which make best of the fume collection efficiency, and insure the workers’ health in the largest extent.
6) It is equipped with three layer filter system to avoid the damage effect of flame and large slag particles, which extend the useful life, more safe and more reliable.
7) The clean air is exhausted uniformly and diffusely through the gridiron outlet, so it can minimize the noise.
8) It is attached with all-direction caster wheels, which makes the facility movable freely and easy to position.
9) Photoelectric controlled on/off, energy saving and high efficiency. The hood has the lighting device which is upon customer’s choice.
10) The parts working condition are all stable and has long useful life, meantime easy to be replaced.
Other main welding fume extractors:
1. LB-JZX model(double cartridge filters fume extractor for metal welding, welding workshop cleaner machine ):
| Model | Airflow(m3/h) | Power(kw) | Voltage(v/hz) | Size(mm) | Noise(dB(A)) |
| LB-JZX2400 | 2400 | 2.2 | 380/50HZ | 900*800*1480 | 75 |
| LB-JZX3600 | 3600 | 3.0 | 380/50HZ | 900*800*1480 | 78 |
| LB-JZX4800 | 4800 | 4.0 | 380/50HZ | 900*800*1480 | 78 |
| LB-JZX2400S | 2400 | 2.2 | 380/50HZ | 900*800*1480 | 75 |
| LB-JZX3600S | 3600 | 3.0 | 380/50HZ | 900*800*1480 | 78 |
| LB-JZX4800S | 4800 | 4.0 | 380/50HZ | 900*800*1480 | 78 |
The JZX models welding fume extractor is one updated model from LB-JZ models, which have a high performanec than the LB-JZ series welding fume extractors
2.LB-BG model(wall mounted welding smoke eater type):
| Model | AirflowM³/h | VoltageV/HZ | PowerKW | Filter efficiency | Dimension(MM) | NoisedbA |
| BG1200 | 1200 | 380V/50 | 0.75 | 99.9% | 600*500*600 | <72 |
| BG1500 | 1500 | 380V/50 | 1.5 | 99.9% | 600*500*600 | <72 |
| BG2400 | 2400 | 380V/50 | 2.2 | 99.9% | 600*500*600 | <75 |
3.LB-JK model(with simple structure welding dust collector, air cleaner for metal fabriaction ) :
| Model | Airflow(m3/h) | Power(kw) | Voltage(v/hz) | Size(mm) | Noise(dB(A)) |
| LB-JK1200 | 1200 | 0.75KW | 220/50HZ | 530*640*1000 | 65
|
4.LB-JF model(High vacuum pressure type welding fume master,especially for robot welding):
| Model | Airflow M³/h | Power KW | Voltage V/Hz | Kpa | Ash removal model | compressed air (mpa) | Dimension (mm) | Noise (dbA) |
| JF190 | 190 | 1.5 | 380/50 | 23000 | automatic blow | 0.5-0.6 | 550*550*1100 | <72 |
| JFS245 | 245 | 3.0 | 380/50 | 32000 | 0.5-0.6 | 550*550*1100 | <75 |
|
|
Portable and Movable Welding Fume Extractor/Mobile Laser Cutting Dust Collector Images
|
